Safety Sling Company

919 Fulton Street | Pitssburgh, PA 15233 | 1.800.242.1540 | 412.231.6684 | Fax:412.231.6695 | sales@safetysling.com

Online CatalogAbout Safety SlingWire RopeWire Rope SlingsNylon Web SlingsChain SlingsTwin-Path SlingsTicknor® Adjustable SlingsGripper Mesh SlingsFittings & HardwareChainBlocksClampsHoistsFall ProtectionDirectory of ManufacturersSafety Sling Company
Search Catalog
      GO   
 All Categories    G-320C Galv. Carbon Eye Hoist Hooks
All Categories > Fittings & Hardware > Hooks > G-320C Galv. Carbon Eye Hoist Hooks > View Items  

G-320C Galv. Carbon Eye Hoist Hooks

Check up to five results to perform an action.

  • Designed with a 5:1 Design Factor.
  • The most complete line of Eye hoist hooks.
  • Proper design, careful forging and precision controlled quenched and tempering give maximum strength without excessive weight and bulk.
  • Every Crosby Eye Hook has a pre-drilled cam which can be equipped with a latch. Even years after purchase of the original hook, latch assemblies can be added.
  • Eye hooks are load rated.
  • Hoist hooks incorporate two types of strategically placed markings forged into the product which address two (2) QUIC-CHECK® features:
  • Deformation Indicators — Two strategically placed marks, one just below the shank or eye and the other on the hook up, which allows for a QUIC-CHECK® measurement to determine if the throat opening has changed, thus indicating abuse or overload.
  • To check, use a measuring device (i.e. tape measure) to measure the distance between the marks. The marks should align to either an inch or half-inch increment on the measuring device. If the measurement does not meet this criteria, the hook should be inspected further for possible damage.
  • Angle Indicators — Indicates the maximum included angle which is allowed between two (2) sling legs in the hook. These indicators also provide the opportunity to approximate other included angles between two sling legs.
  • The following additional features have been incorporated in the new Crosby S-320N Eye Hoist Hooks. (Sizes 3/4 ton Carbon through 22 ton Alloy.)
  • A new cross section design (see inset drawing) that enhances the overall performance.
  • Fatigue rated at 1-1 /2 times the Working Load Limit at 20,000 cycles.
  • Can be proof tested to 2-1 /2 times the working Load Limit.
  • Can be Metric Rated at 5:1 Design Factor.
  • Low profile hook tip.
  • New integrated latch (S-4320) meets the World class standard for lifting.
  • Heavy duty stamped latch interlocks with the hook tip.
  • High cycle, long life spring.
  • When secured with proper cotter pin through the hole in the tip of hook, meets the intent of OSHA Rule 1926.550(g) for personnel hoisting.
*Eye Hooks (3/4 TC - 22TA), Proof load is 2.5 times Working Load Limit. Eye Hooks (20 TC - 60TA), Proof Load is 2 times Working Load Limit. All carbon hooks-average straightening loads (ultimate load) is 5 times Working Load Limit. +New 320N style hook.





    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  
Compare Items
   
  Results 1 - 9 of 9 1 

Item #

Item Name

C (in)

D (in)

F (in)

G (in)

J (in)

K (in)

M (in)

N (in)

O (in)

Q (in)

T (in)

AA (in)

Weight each (lbs)

Working Load Limit (tons)

Hook ID Code

1022208+ G-320C Galv. Carbon Eye Hoist Hooks 3.34 2.83 1.25 .73 .90 .63 .63 .36 .89 .75 .87 1.50 .61 3/4 D
1022219+ G-320C Galv. Carbon Eye Hoist Hooks 3.81 3.11 1.38 .84 .93 .71 .71 .42 .91 .91 .98 2.00 .89 1 F
1022230+ G-320C Galv. Carbon Eye Hoist Hooks 4.14 3.53 1.50 1.00 1.00 .88 .88 .55 1.00 1.13 1.03 3.00 1.44 1-1/2 G
1022241+ G-320C Galv. Carbon Eye Hoist Hooks 4.69 3.97 1.63 1.13 1.13 .94 .94 .58 1.09 1.25 1.16 2.00 2.07 2 H
1022249+ G-320C Galv. Carbon Eye Hoist Hooks 5.77 4.81 2.00 1.44 1.47 1.31 1.31 .72 1.36 1.56 1.53 2.50 4.30 3 I
1022262+ G-320C Galv. Carbon Eye Hoist Hooks 7.37 6.27 2.50 1.81 1.75 1.66 1.66 .90 1.61 2.00 1.96 3.00 8.30 5 J
1022274+ G-320C Galv. Carbon Eye Hoist Hooks 9.07 7.45 3.00 2.25 2.29 1.88 1.63 1.11 2.08 2.44 2.47 4.00 15.00 7-1/2 K
1022285+ G-320C Galv. Carbon Eye Hoist Hooks 10.08 8.30 3.25 2.59 2.50 2.19 1.94 1.27 2.27 2.84 2.62 4.00 21.60 10 L
1022296+ G-320C Galv. Carbon Eye Hoist Hooks 12.53 10.30 4.25 3.00 3.30 2.69 2.38 1.56 3.02 3.50 2.83 5.00 39.50 15 N
  Results 1 - 9 of 9 1