Safety Sling Company

919 Fulton Street | Pitssburgh, PA 15233 | 1.800.242.1540 | 412.231.6684 | Fax:412.231.6695 | sales@safetysling.com

Online CatalogAbout Safety SlingWire RopeWire Rope SlingsNylon Web SlingsChain SlingsTwin-Path SlingsTicknor® Adjustable SlingsGripper Mesh SlingsFittings & HardwareChainBlocksClampsHoistsFall ProtectionDirectory of ManufacturersSafety Sling Company
Search Catalog
      GO   
 All Categories    Sockets
All Categories > Fittings & Hardware > Sockets  
 

Sockets


Click on a Product to view details.

Open Spelter Socket- Galvanized Primary

G-416 Galvanized Open Spelter Sockets

(20)
  • Forged Steel Sockets thru 1-1/2", cast alloy steel 1-5/8" thru 4"
  • Spelter socket terminations have an efficiency rating of 100%, based on the catalog strength of wire rope. Ratings are based on recommended use with 6 x 7, 6 x 19, or 6 x 37, IPS or XIP (EIP), XXIP (EEIP), RRL, FC, or IWRC wire rope

    Open Groved Sockets meet the performance requirements of Federal Specification RR-S-550D, Type A, except for those provisions required of the contractor.

    NOTICE: All cast steel sockets 1-5/8” and larger are magnetic particle inspected and ultrasonic inspected. Proof testing available on special order. Drawing illustrates one groove used on sockets ¼” thru ¾”.
  • S-501 Open Swage Socket

    S-501 Open Swage Sockets

    (16)
    • Forged from special bar quality carbon steel, suitable for cold forming.
    • Hardness controlled by spheroidize annealing.
    • Swage Socket terminations have an efficiency rating of 100% based on the catalog strength of wire rope.
    • Stamp for identification after swaging without concern for fractures (as per directions in National Swaging Brochure).
    • Swage sockets incorporate a reduced machined area of the shank which is equivalent to the proper "After Swage" dimension. Before swaging, this provides for an obvious visual difference in the shank diameter. After swaging, a uniform shank diameter is created allowing for a QUIC-CHECK®and permanent visual inspection opportunity.
    • Designed to quickly determine whether the socket has ...
    S-502 Closed Swage Socket

    S-502 Closed Swage Socket

    (16)
    • Forged from special bar quality carbon steel, suitable for cold forming.
    • Hardness controlled by spheroidize annealing.
    • Swage Socket terminations have an efficiency rating of 100% based on the catalog strength of wire rope.
    • Stamp for identification after swaging without concern for fractures (as per directions in National Swaging Brochure).
    • Swage sockets incorporate a reduced machined area of the shank which is equivalent to the proper "After Swage" dimension. Before swaging, this provides for an obvious visual difference in the shank diameter. After swaging, a uniform shank diameter is created allowing for a QUIC-CHECK® and permanent visual inspection opportunity.
    • Designed to quickly determine whether the socket has ...
    Open Spelter Socket- Galvanized Primary

    S-416 Self Colored Open Spelter Sockets

    (20)
  • Forged Steel Sockets thru 1-1/2", cast alloy steel 1-5/8" thru 4"
  • Spelter socket terminations have an efficiency rating of 100%, based on the catalog strength of wire rope. Ratings are based on recommended use with 6 x 7, 6 x 19, or 6 x 37, IPS or XIP (EIP), XXIP (EEIP), RRL, FC, or IWRC wire rope

    Open Groved Sockets meet the performance requirements of Federal Specification RR-S-550D, Type A, except for those provisions required of the contractor.

    NOTICE: All cast steel sockets 1-5/8” and larger are magnetic particle inspected and ultrasonic inspected. Proof testing available on special order. Drawing illustrates one groove used on sockets ¼” thru ¾”.
  • G417 & S417 Primary

    G-417 Galvanized Closed Spelter Sockets

    (20)
    • Forged Steel Sockets thru 1-1/2", cast alloy steel 1-5/8" thru 4".
    • Spelter socket terminations have an efficiency rating of 100%, based on the catalog strength of wire rope. Ratings are based on the recommended use with 6 x 7, 6 x 19 or 6 x 37, IPS or XIP (EIP), XXIP (EEIP), RRL, FC or IWRC wire rope.
    All cast steel sockets 1-5/8" and larger are magnetic particle inspected and ultrasonic inspected. Proof testing available on special order. * Diameter of pin must not exceed pin used on companion 416 socket. † Cast Alloy Steel. Note: drawing on the left illustrates one groove used on sockets 1/4" thru 3/4".

    Closed grooved Sockets meet the performance requirements of Federal Specification RR-S-550D, Type B, except ...
    G417 & S417 Primary

    S-417 Self Colored Closed Spelter Sockets

    (20)
    • Forged Steel Sockets thru 1-1/2", cast alloy steel 1-5/8" thru 4".
    • Spelter socket terminations have an efficiency rating of 100%, based on the catalog strength of wire rope. Ratings are based on the recommended use with 6 x 7, 6 x 19 or 6 x 37, IPS or XIP (EIP), XXIP (EEIP), RRL, FC or IWRC wire rope.
    All cast steel sockets 1-5/8" and larger are magnetic particle inspected and ultrasonic inspected. Proof testing available on special order. One groove used on sockets 1/4" thru 3/4". * Diameter of pin must not exceed pin used on companion 416 socket. † Cast Alloy Steel.

    Closed grooved Sockets meet the performance requirements of Federal Specification RR-S-550D, Type B, except for those provisions required of the ...
    S-421T Wedge Socket - TERMINATOR™ Assembly

    S-421T Wedge Socket - TERMINATOR™ Assembly

    (8)
  • Basket is cast steel.
  • Individually magnetic particle inspected.
  • Pin diameter and jaw opening allows wedge and socket to be used in conjuction with open swage and spelter sockets.
  • Secures the tail or "dead end" of the wire rope to the wedge, thus eliminates loss or "Punch out" of the wedge.
  • Eliminates the need for an extra piece of rope, and is easily installed.
  • The TERMINATOR™wedge eliminates the potential breaking off of the tail due to fatigue.
  • The tail, which is secured by the base of the clip and the wedge, is left undeformed and available for reuse.
  • Incorporates Crosby's patented QUIC-CHECK®"Go" and "No-Go" feature cast into the wedge. The proper size rope is determined when the following criteria are met: ...