Positive Lock Latch is Self-Locking when hook is loaded.
Forged Alloy Steel - Quenched and Tempered.
Rated for both Wire Rope and Grade 80 Chain.
Meets ASTM A-952-96 and proposed Euronorm standards for Grade 80 chain fittings.
Fatigue rated.
The SHUR-LOC® hook, if properly installed and locked, can be used for personnel lifting applications and meets the intent of OSHA Rule 1926.550 (g) (4) (iv) (B).
G-414 Heavy Thimble should be used with wire rope slings.
Individually Proof Tested at 2-1/2 times the Working Load Limit with certification.
Trigger repair Kit available (S-4316). Consist of spring, roll pin and trigger.
Designed with Engineered Flat to connect to Grade 80 chain fittings.
Positive Lock Latch is Self-Locking when hook is loaded.
Forged Alloy Steel - Quenched and Tempered.
Rated for both Wire Rope and Grade 80 Chain.
Meets ASTM A-952-96 and proposed Euronorm standards for Grade 80 chain fittings.
Fatigue rated.
The SHUR-LOC® hook, if properly installed and locked, can be used for personnel lifting applications and meets the intent of OSHA Rule 1926.550 (g) (4) (iv) (B).
G-414 Heavy Thimble should be used with wire rope slings.
Individually Proof Tested at 2-1/2 times the Working Load Limit with certification.
Trigger repair Kit available (S-4316). Consist of spring, roll pin and trigger.
Designed with Engineered Flat to connect to Grade 80 chain fittings.
*These A-323 hooks are forged with an "8" designating Grade 80, and are suitable for use with Grade 8 chain in over head lifting applications as long as hook is Proof Tested as part of the chain sling assembly or as an individual component per ANSI B30.9c. We recommend the use of A-328 which is proof-tested and supplied with a proof test certificate.
*These A-330 hooks are forged with an "8" designating Grade 80, and are suitable for use with Grade 8 chain in over head lifting applications as long as hook is Proof Tested as part of the chain sling assembly or as an individual component per ANSI B30.9c. We recommend the use of A-328 which is proof-tested and supplied with a proof test certificate
(7) Forged Carbon Steel - Quenched and Tempered.
* Ultimate Load is 4 times the Working Load Limit.
Not Suitable for use with Grade 80 chain and chain slings used in overhead lifting. For slings or lifting chains, Grade 80 or 100 alloy components are recommended.
Forged Carbon Steel or Forged Alloy Steel - Quenched and Tempered.
All pins are Alloy Steel - Quenched and Tempered.
Not Suitable for use with Grade 80 chain and chain slings used in overhead lifting. For slings or lifting chains, Grade 80 or 100 alloy components are recommended.
* Ultimate Load is 4 times the Working Load Limit.
Forged Carbon Steel or Forged Alloy Steel - Quenched and Tempered.
All pins are Alloy Steel - Quenched and Tempered.
Not Suitable for use with Grade 80 chain and chain slings used in overhead lifting. For slings or lifting chains, Grade 80 or 100 alloy components are recommended.
* Ultimate Load is 4 times the Working Load Limit.
Proper design, careful forging and precision controlled quenched and tempering give maximum strength without excessive weight and bulk.
Every Crosby Eye Hook has a pre-drilled cam which can be equipped with a latch. Even years after purchase of the original hook, latch assemblies can be added.
Eye hooks are load rated.
Hoist hooks incorporate two types of strategically placed markings forged into the product which address two (2) QUIC-CHECK® features:
Deformation Indicators — Two strategically placed marks, one just below the shank or eye and the other on the hook up, which allows for a QUIC-CHECK® measurement to determine if the throat ...
Proper design, careful forging and precision controlled quenched and tempering give maximum strength without excessive weight and bulk.
Every Crosby Eye Hook has a pre-drilled cam which can be equipped with a latch. Even years after purchase of the original hook, latch assemblies can be added.
Eye hooks are load rated.
Hoist hooks incorporate two types of strategically placed markings forged into the product which address two (2) QUIC-CHECK® features:
Deformation Indicators — Two strategically placed marks, one just below the shank or eye and the other on the hook up, which allows for a QUIC-CHECK® measurement to determine if the throat ...
Proper design, careful forging and precision controlled quenched and tempering give maximum strength without excessive weight and bulk.
Every Crosby Eye Hook has a pre-drilled cam which can be equipped with a latch. Even years after purchase of the original hook, latch assemblies can be added.
Eye hooks are load rated.
Hoist hooks incorporate two types of strategically placed markings forged into the product which address two (2) QUIC-CHECK® features:
Deformation Indicators — Two strategically placed marks, one just below the shank or eye and the other on the hook up, which allows for a QUIC-CHECK® measurement to determine if the throat ...
Proper design, careful forging, and precision controlled quench and tempering gives maximum strength without excessive weight and bulk.
Every Crosby Swivel hoist hook has a pre-drilled cam which can be equipped with a latch. Even years after purchase of the original hook, latch assemblies can be added.
Load rating codes stamped on each hook. 322 Swivel Hooks use the same load rating code as 319 Shank Hooks.
Hoist hooks incorporate markings forged into the product which address two (2) QUIC-CHECK® features:
Deformation Indicators — Two strategically placed marks, one just below the shank or eye and the other on the hook tip, which allows for a QUIC-CHECK® measurement to determine if the ...
Proper design, careful forging, and precision controlled quench and tempering gives maximum strength without excessive weight and bulk.
Every Crosby Swivel hoist hook has a pre-drilled cam which can be equipped with a latch. Even years after purchase of the original hook, latch assemblies can be added.
Load rating codes stamped on each hook. 322 Swivel Hooks use the same load rating code as 319 Shank Hooks.
Hoist hooks incorporate markings forged into the product which address two (2) QUIC-CHECK® features:
Deformation Indicators — Two strategically placed marks, one just below the shank or eye and the other on the hook tip, which allows for a QUIC-CHECK® measurement to determine if the ...
